EASYGrout mixes readily with water to give a highly flowable joint filling, and grouting mortar ideal for use on interior and exterior tiled floor surfaces where a high early strength, resilient, compact grout joint is needed, particularly in areas subject to early and sustained trafficking.
It is not suitable for use on vertical surfaces. It is designed specifically for ceramic and porcelain tiles and is not recommended for use on natural stone. Natural stone and porous materials are particularly at risk from permanent discolouration.
Overview
A high-quality slurry grout for use on porcelain.
- Designed specifically for ceramic and porcelain tiles for a fine, textured finish.
- A cementitious grout which is applied as a slurry unlike traditional floor tile grouts.
- Easy to use. Simply mix, pour, sweep, and rinse.
- Each tub contains 3 x 5kg bags for minimal waste.
- EASYGrout is available in a range of colours and is suitable for joints from 5mm to 25mm wide with a minimum depth of 20mm.
Coverage
The coverage of EASYGrout depends primarily upon the tile / slab dimensions and the joint width and depth.
The following table gives a rough guide as to what level of coverage can be achieved with 15kg of EASYGrout when used with the tile and joint dimension shown below:
| Length mm | Width mm | Depth mm | Joint width mm | Area covered per 15kg |
|---|
| 300 | 300 | 20 | 6 | 9.3 |
| 300 | 400 | 25 | 10 | 5.1 |
| 600 | 600 | 20 | 5 | 21.75 |
| 450 | 450 | 25 | 10 | 6.75 |
Customer Reviews
Be the first to enter a review for this product
Log in to leave your review of this product.